Battery test Equipment from Yarostanmash LLC

The Yarostanmash LLC company develops and manufactures battery test equipment for testing cells, batteries, as well as any chemical current sources:

accumulators and rechargeable batteries of any type (Li-ION, Li-Po, LiFePo4, LTO, NMC, Ni-Cd, Ni-MH, Pb-Acid, as well as any others)
supercapacitors (ultracapacitors), and also batteries of them
galvanic cells (primary power supplies)
fuel cells and also battery of them
redox batteries
solar panels
wind turbines
as well as any other chemical and physical sources and storages of energy.

The company was founded in 2009 by a graduate of the Moscow Power Engineering Institute Yaroslav Menshikov.

The main products of Yarostanmash LLC are battery testers ACK, as well as cell and battery testers, potentiostats ACK

Battery test equipment from Yarostanmash LLC are distinguished by high reliability, extreme flexibility in setting test modes, and also completeness of returned measurement results. The devices allow performing one-time, periodic, selective, as well as cycle-life and climatic tests of various power sources. The processing of measurement results, as well as the calculation of summary parameters for each charge discharge cycle is performed automatically. Thanks to this, the User does not need to spend time and resources on post-processing of measurement results.

Testers of chemical current sources ACK allow you to automate and put on stream electrical tests of any chemical current sources. Testers are used in research laboratories, institutes, as well as in the production of batteries, supercapacitors and other current sources.

Also, the Yarostanmash LLC can develop and manufacture battery testing systems to order, according to the individual requirements of the Customer.

Battery test Equipment

The list of products of Yarostanmash LLC is constantly expanding, and includes, among other things, the following items:

Battery testers ACK

Battery tester ACK150.24.1750.1. Charge current, as well as discharge current from 1 to 150A (up to 3000A with parallel operation of the devices). Voltage on tested battery from 1 to 28V.

Battery tester ACK75.48.1750.1. Charge current, as well as discharge current from 0.5 to 75A (up to 1500A with parallel operation of the devices). Voltage on tested battery from 1 to 56V.

Battery tester ACK100.24.650.1. Charge current, as well as discharge current from 1 to 100A (up to 2000A with parallel operation of the devices). Voltage on tested battery from 1 to 28V.

Battery tester ACK50.48.650.1. Charge current, as well as discharge current from 0.5 to 50A (up to 1000A with parallel operation of the devices). Voltage on tested battery from 1 to 56V.

Detailed information about battery testers ACK

Cell and battery testers, potentiostats ACK

Cell and battery tester, potentiostat ACK2.5.10.8. Charge current, as well as discharge current from 2.5uA to 2.5A per channel (up to 20A with parallel operation of all channels). Voltage on tested cell from minus 4.5 to plus 4.5V. 8 channels.

Cell and battery tester, potentiostat ACK2.5.10.2. Charge and discharge current from 2.5uA to 2.5A per channel (up to 5A with parallel operation of both channels). Voltage on tested cell from minus 4.5 to plus 4.5V. 2 channels.

Cell and battery tester, potentiostat ACK2.5.10.1. Charge current, as well as discharge current from 2.5uA to 2.5A. Voltage on tested cell from minus 4.5 to plus 4.5V.

Detailed information about cell and battery testers, potentiostats ACK

Auxiliary equipment for battery testing

Multichannel USB recorder MRD420.6G. Device has six independent inputs with galvanic isolation as well as with a reconfigurable input voltage range from 0-1 to 0-420V. For example, you can measure the voltage on a battery using channel 1, and measure the current through it using channel 2. In addition, you can measure temperature of the battery by channel 3. Logger connects to a User’s computer via USB port.

Self discharge logger RSR-01. Designed to record the voltage drop curve U (t) during self-discharge of supercapacitors and supercapacitor batteries. Input voltage from 0.1 to 370V. Also, the registrator has a built-in UPS.